[. . . ] ENVCWI-PTG1 Wireless Network (IP) Camera with PAN & TILT Quick Installation Guide 1 Getting Started Package Contents Check the items contained in the package carefully. [. . . ] When the camera is powered on, the camera will automatically search any access point with "default" SSID. Connecting the External Antenna NOTE If the camera cannot connect to your wireless network, you need to install the camera in LAN and proceed with WLAN settings. -4- 3 Accessing the Camera Using IPFinder 1. Insert the Installation CD-ROM into your computer's CD-ROM drive to initiate the Auto-Run program. The control panel will appear as below. Display the connected camera(s). Double click to link the Camera. Click About to get the Version information of IPFinder. Once you get the IP address of the camera, launch the Web browser through Link button or use the UltraView software to access your camera. TIP The Installation CD-ROM provides a setup program that allows you to install IPFinder on your computer. To install -5- IPFinder, click Install Software then select IPFinder on the Auto-Run screen. Accessing to the Camera 1. Since the default configuration of the camera is DHCP mode enabled, you are recommended to launch IPFinder to search the IP address that is assigned to the camera by the DHCP server, and then click Link to access the camera via the Web browser. [. . . ] If you have any problem on the product(s), please contact your local authorized dealer or check our web site http://www. encoreusa. com for support. -8- [. . . ]